designation qty description c1, c3 2 4.7 f f q 10%, 10v x5r ceramic capacitors (0603) tdk c1608x5r1a475k c2, c4 2 10 f f q 10%, 10v x7r ceramic capacitors (0805) murata grm21br71a106k c5, c6 0 not installed, ceramic capacitors (0805) ju1 1 3-pin header l1, l2 2 4.7 f h, 0.9a low-profile inductors sumida cdh36d07hf-4r7mc designation qty description r1 0 not installed, resistor?short pc trace (0603) u1 1 dual-output dc/dc power supply for amoled displays (24 tqfn-ep) maxim max17116etg+ ? 1 shunt ? 1 pcb: max17116q evaluation kit supplier phone website murata electronics north america, inc. 770-436-1300 www.murata-northamerica.com sumida corp. 847-545-6700 www.sumida.com tdk corp. 847-803-6100 www.component.tdk.com max17116q evaluation kit evaluates: max17116 in a 24-pin tqfn package _________________________________________________________________ maxim integrated products 1 for pricing, delivery, and ordering information, please contact maxim direct at 1-888-629-4642, or visit maxim?s website at www.maxim-ic.com. component list component suppliers 19-5846; rev 0; 5/11 ordering information appears at end of data sheet. general description the max17116q evaluation kit (ev kit) is a fully as sem- bled and tested surface-mount pcb that evaluates the max17116 dual-output dc/dc power supply for active-matrix organic light-emitting diode (amoled) displays, available in a 24-pin tqfn package with a n exposed pad. the ev kit includes dual switch-mode power-supply (smps) outputs, a fixed +4.6v pwm step - up regulator, and an adjustable (-5.4v to -1.5v) pw m inverting regulator. the ev kit operates from a +2. 3v to +4.2v single power supply. features s +2.3v to +4.2v input range s high-performance pwm step-up regulator s high-performance pwm inverting regulator s 1.4mhz switching frequency s shutdown control s proven pcb layout s fully assembled and tested note: indicate that you are using the max17116 when cont acting these component suppliers. downloaded from: http:///
shunt position en pin smps regulators 1-2* connected to in v elvdd = +4.6v v elvss = -4.9v 2-3 connected to agnd v elvdd = 0v v elvss = 0v not installed external pulses must be applied to the en test pad v elvdd = +4.6v v elvss = -5.4v to -1.5v (based on en pulses) _________________________________________________________________ maxim integrated products 2 max17116q evaluation kit evaluates: max17116 in a 24-pin tqfn package quick start recommended equipment ? max17116q ev kit ? +2.3v to +4.2v, 1a power supply (vin) ? two digital voltmeters procedure the ev kit is fully assembled and tested. follow the steps below to verify board operation. caution: do not turn on the power supply until all connections are completed. 1) verify that jumper ju1 is in the default position, as shown in table 1. 2) connect the positive terminal of the power supply to the vin pcb pad and the negative terminal to the nearest pgnd pcb pad. 3) connect the first voltmeter across the elvdd pcb pad and the nearest pgnd pcb pad. 4) connect the second voltmeter across the elvss pcb pad and the nearest pgnd pcb pad. 5) turn on the dc power supply. 6) verify that the voltmeters display v elvdd = +4.6v and v elvss = -4.9v. detailed description of hardware the max17116q ev kit includes two current-mode 1.4mhz smps regulators for amoled displays. the positive supply is provided by a step-up regula tor with a synchronous rectifier. the negative supply is pro vided by an inverting regulator with a synchronous rectif ier. the step-up regulator output is a fixed voltage of +4.6v and the inverting regulator output is adjustable fr om -5.4v to -1.5v through the single-wire en serial interfac e. the ev kit operates from a +2.3v to +4.2v single power sup ply. step-up regulator the ev kit includes a step-up dc-dc converter with integrated power mosfet switch and synchronous rectifier. the step-up regulator output (elvdd) has a fixed voltage of +4.6v and can provide an output current of 250ma. inverting converter the ev kit contains an inverting dc-dc converter with an integrated power mosfet switch and synchronous rectifier. the inverting regulator output (elvss) is adjust- able from -5.4v to -1.5v and can provide an output current of 250ma. the elvss output voltage can be adjusted through the single-wire en serial interface. enable input and serial interface input the ev kit features a 3-pin jumper (ju1) to control the enable input and an en test pad to access the seria l inter- face input. connect en to in for normal operation. connect en to agnd to place the device into shutdown mode. the enable pin is also used as a serial-interface input to adjust the inverting converter output voltage. with no shunts installed on jumper ju1, connect an external pulse generator at the en test pad and send the required serial pulses. refer to the en serial interface section in the max17116 ic data sheet for a more detailed descrip- tion. table 1 lists the selectable jumper options. table 1. jumper ju1 function * default position. downloaded from: http:///
_________________________________________________________________ maxim integrated products 3 max17116q evaluation kit evaluates: max17116 in a 24-pin tqfn package figure 1. max17116q ev kit schematic downloaded from: http:///
1.0?? 1.0?? 1.0?? _________________________________________________________________ maxim integrated products 4 max17116q evaluation kit evaluates: max17116 in a 24-pin tqfn package figure 2. max17116q ev kit component placement guide? component side figure 3. max17116q ev kit pcb layout?component side figure 4. max17116q ev kit pcb layout?solder side downloaded from: http:///
part type MAX17116QEVKIT# ev kit _________________________________________________________________ maxim integrated products 5 max17116q evaluation kit evaluates: max17116 in a 24-pin tqfn package ordering information # denotes rohs compliant. downloaded from: http:///
revision number revision date description pages changed 0 5/11 initial release ? maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a maxim product. no circuit patent licenses are implied. maxim reserves the right to change the circuitry and specifications without notice at any time. maxim integrated products, 120 san gabriel drive, sunnyvale, ca 94086 408-737-7600 6 ? 2011 maxim integrated products maxim is a registered trademark of maxim integrated products, inc. max17116q evaluation kit evaluates: max17116 in a 24-pin tqfn package revision history downloaded from: http:///
|
